Follow these simple mounting instructions. Click “Read More” for details.
Wiring
Welcome to our guide on testing the resistance of floor heating system wires using a digital multimeter. To ensure that your floor heating system will function properly, always test the resistance of your wires with a digital multimeter set to 200 ohms before, during and after installation. Let’s dive into the steps of how to check the resistance readings of your electric floor heating system to help you get started.
The 120V coil of the WSM-63 is powered between the one leg of 240VAc and a neutral they. Do NOT run both hots to the WSM-63. Please refer to the installation manuals for further information.
Start Wiring your Thermostat by Pulling Power from Terminals 2 and 5 Wiring the WSM-63 and ETO2 together is a great way to be able to control the WSM-63 timer panel with a pavement sensor. Pull the power from Terminals 2 and 5 and input into the L and N on the ETO2 controller. […]
Wiring your Tempo thermostat is simple and straightforward.
The maximum length Warmup recommends you can extend your snowmelt systems lead is 90′.
Yes, the sensor lead can be extended up to 200 meters using same gauge cable. Total resistance of the sensor cable must not exceed 10 ohms.
This post explains how to mount and position your Towel Warmer properly in your space.
This page explains the different circumstances in which you might wire your Towel Warmer to a switch or to a thermostat.
This page explains how to determine which voltage to run to your DCM-PRO heating system.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)