Instead, try pulling the cable off the mesh and spacing the cable every 2 or 2.5 inches apart. Consult your installation manual with further questions regarding where the cable or mat can be run.
Miscellaneous questions
The ground wire of the heater(s) must be directly connected to the ground wire of the supply.
Our cable was tested and measured 0.5 mG at 1/2” (a typical distance between the cable and your feet). This measures at 1/200th of the acceptable value of 100 mG as established by the WHO and Intertek/ETL. It therefore complies with EN50366.
Both 120Vac and 240Vac Warmup heating cable(s) output the same amount of power (wattage) per square foot (13.1 watts), so, the only difference between 120Vac and 240Vac heating cable(s) is the amount (ft2) of heating cable you can attach to one 15A thermostat.
Do you have an old Warmup thermostat that you’d like to upgrade to the 6iE? Learn all you need to know in this post.
Are you wondering how much snow fall a snow melting system can handle? Read more about snow melting technology here.
Are you using the Warmup FOIL system and wondering what the maximum heating temperature is? This post gives you the information you’re looking for.
Looking to update the software on your 4iE thermostat? This post will tell you all about software updates and how they work.
Wondering how much energy self-regulating cable uses? This post will teach you how to calculate energy consumption and running costs.
Notice your weather report on your smart thermostat is off? Find out here how to confirm your location is properly set.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)