After completing a heated wire repair it is safe to replace the needed tile. Make sure your resistance readings are correct before re-laying the tile after the repair is completed.
Miscellaneous questions
The CommBox and Resibox have been programmed to work with a variety of third-party sensors. Click “Read More” for details.
consider tightening the triangles, whilst maintaining the proper height based on the overhang or use t-splices and end kits for downspouts so you do not have to use extra cable coming back up
Out of the box, no. Each ‘box’ will need its own sensor to trigger. Click “Read More” for more details.
Warmup now offers our own DCM-PRO cable, which is a custom designed cable compatible with all uncoupling membranes.
This page outlines installation recommendations when installing over a plywood sub-floor.
Connecting one system to the other in series is often referred to as “daisy chaining”. Each floor heating system must be connected individually to the operating floor heating thermostat.
As long as all systems that connect to the thermostat do not exceed 15 amps, running multiple leads up the conduit to the thermostat location is completely acceptable.
This page discusses installation methods required for installing a Warmup heating system under a floating wood floor.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)